The VW guys all swear by this shop over in canada. He can do complete fuel re-mapping on the Bosch VE pumps, I wonder if he can do the M/MW pumps.

http://forums.vwvortex.com/zerothread?id=2412870


Giles

PERFORMANCE DIESEL INJECTION LTD,.
187 STEELCASE ROAD WEST UNIT 16,
MARKHAM, ON.,
L3R 2R9
905-940-2266


email: super@dalsturbo.com

http://www.dalsturbo.com

Just got off the phone with Giles.



He's done a few MB pumps before, but didn't know there some of us looking for more power.


I told him about this site; I hope he'll chime in soon.

Just got off the phone with Giles.



He's done a few MB pumps before, but didn't know there some of us looking for more power.


I told him about this site; I hope he'll chime in soon.

VERY exciting news!! Thanks Monomer!

If just one injection shop in the US would spend a bit of time on pulling more performance from the MW pump they would get a fair amount of business. I know Brandon314 was working with Diesel Fuel Injection Service of Portland a few months ago, but I don't know how far he got...

I know Brandon314 was working with Diesel Fuel Injection Service of Portland a few months ago, but I don't know how far he got...
I believe they sourced 10mm elements, but that is as far as it got. :confused:

Other than the rack limiter removal and torque adjustments without bigger elements there isnt a whole lot that can be done.

The M-Pump can get 6mm elements from the 606a pump and Myna sells their elements alone for about 45Euro each.

he does do plunger re-sizing or whatever it maybe called.



I believe the VE pumps went to 9mm - out stock MB pumps are 5.5mm....(so I've read)

[quote=Monomer;1791064]The VW guys all swear by this shop over in canada. He can do complete fuel re-mapping on the Bosch VE pumps, I wonder if he can do the M/MW pumps.

http://forums.vwvortex.com/zerothread?id=2412870


Giles

PERFORMANCE DIESEL INJECTION LTD,.
187 STEELCASE ROAD WEST UNIT 16,
MARKHAM, ON.,
L3R 2R9
905-940-2266


email: Giles@performancediesel.ca

http://www.performancediesel.ca

This is my actual email and my website.
Giles

you can't mix plungers from an M pump and MW pump

i'm trying to find a part for bigger ones that will work in the M/B car

Giles

This is my actual email and my website.
Giles
Thanks for the info :)

So what mods to our M and MW pumps would you like to sell us? ;)

Hi

I have done a number of stock M/B before and tweaked the pump
cc's in the right places and it made a really great car to drive

as for changes to modded vehicles i will need to start changing
internal pump parts and trying to find the right Bosch part #'s
for this is really hard but i will try.

Giles

Hi

I have done a number of stock M/B before and tweaked the pump
cc's in the right places and it made a really great car to drive

as for changes to modded vehicles i will need to start changing
internal pump parts and trying to find the right Bosch part #'s
for this is really hard but i will try.

Giles


Thats the problem I have....

Trying to find larger elements that have similar characteristics to the original 5.5mm ones fitted....

I believe the Myra lot used 7mm elements but havent a clue from what or if they are otherwise similar as to top cut/helix:confused:

I can get nearly any element you like, Just don't know the numbers!:mad:

Someone needs to send Giles the dieselboost videos. :) Tell him that's what we're looking for. :D