000-4731... UNIVERSAL CLUTCH CENTERING TOOL - 15-28mm, Use to center clutch disc with clutch pressure plate. Application: W107, 123, 124, 126, 129, 140, 163, 168, 169, 170, 171, 201, 202, 203, 208, 209, 210, 211, 245.2, 414, 639 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=000-4731)

000-5843... CHAIN LINK PRESS - DOUBLE ROW, Use to press on external lugs and rivets of dip-type fasteners of duplex roller chain, Use with #103-0163 to rivet single row chains. See #966-5843 to remove rivets. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=000-5843)

102-0463... TEST HARNESS - EHA, Tests CIS-E electronic idle speed control with standard multimeter. (VOM-DMM). Application Engines: W102, 103, 112, 113, 116, 117 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=102-0463)

103-0037... SPARK PLUG WIRE PLIERS, Use to remove the 'BERU' type wires on late model cars. Wide grip section and special angle make it easy to remove plug wires without separating crimps. Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0037)

103-0040... FAN HOLDING TOOL, Use to hold fan pulley while loosening and tightening screws in viscosity fan
couplings. Use with tool # 103-0109 or tool # 102-0308. Also see kit #B9042. Application Engines: M103, 104 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0040)

103-0063... TEST CABLE - 3 PIN, Use to adapt # 909-0021 to later type idle control units. Application Engine: M102, 103, 104, 116, 117 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0063)

103-0109... Superseded to ST3049-8, SHORT HEX HEAD SOCKET, 8mm X 24mm LONG 3/8" Drive, Removes screws on viscosity fan couplings and pulley facings. Application: M103, 104, 119, 120, 602, 603, 605, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0109)

103-0163... CHAIN LINK PRESS ADAPTER - SINGLE ROW, Use with tool #000-5843 to rivet single row timing chains. Application: M102, 103, 104, 111, 112, 113, 116, 166, 602, 603, 611, 612, 613, 640, 646, 647, 648, 668 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0163)

103-0209... OIL FILTER SOCKET/WRENCH - 14 POINT 74mm 3/8" DRIVE, Socket type filter remover for spin on oil filters and filter housings. Reinforced construction and side lock bolts to remove the most stubborn filters. Also see #H2172. Application Engines: M102, 103, 104, 111, 112, 113, 119, 120, 137, 155, 272, 275, 285, 611, 612, 613, 628, 646, 647, 648 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=103-0209)

1090... TRANSMISSION PRESSURE GAUGE SET, Dual gauges allow testing of automatic transmission shift pressures. Kit includes: Two gauges 160psi and 300psi, hook and sufficient hose to bring gauges into car for road tests.(#123-0421). Application: 720.1, 722.0, 722,.1, 722.2, 722.3, 722.4, 722.5, 722.6 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1090)

110-0059... LDA - DASH PULLING HOOK-WIDE (Pair), Flat hooks for instument clusters on older models. Application: W107, 108, 109, 111, 114, 115, 116, 123, 125 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=110-0059)

110-0359... WEDGE (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=110-0359)

110-0761... NO LONGER AVAILABLE...Front CRANKSHAFT SEAL RING SLEEVE INSTALLER 110, 116, 117, 123...NO LONGER AVAILABLE.
Read DIY
http://www.mercedesshop.com/Wikka/OM617CrankshaftSeal (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=110-0761)

1106... CYLINDER LEAKDOWN PRESSURE TESTER, Check cylinder leakage rate to detect worn or broken rings, gaskets, cylinders, and valves. Kit includes: Heavy duty gauges, hose, 10mm and 14mm spark plug port adapters. Application: ALL (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1106)

111-1861... VALVE SPRING COMPRESSOR ARM Use with tool #102-0161 for 102. Use with tool #102-0359 for 102-16 valve. Use with tool #103-0061 for 103 Use with tool #601-0259 for 601. Use with #111-0059 for all others...M102, 103, 104, 111, 112, 113, 119, 120, OM601, 602, 603, 604, 605, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=111-1861)

1117... MACPHERSON STRUT SPRING COMPRESSOR. Compresses all types of MacPherson style coil springs front and rear. Includes: three sets of jaws (2) for 110mm, 120mm and 130mm springs... Application: W163, 164, 171, 203, 209, 210, 211, 219, 230, 245, 251 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1117)

1117J... MACPHERSON STRUT SPRING COMPRESSOR, Compresses all types of MacPherson style coil springs front and rear. Includes three sets of jaws (2) for 110, 120 and 130mm springs found in most Mercedes. Application: W163, 164, 171, 203, 209, 210, 211, 219, 230, 245, 251 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1117J)

112-0040... VIBRATION DAMPER COUNTER-HOLDER, Holds vibration damper when loosening and tightening center bolt. Handle can be extended with commercially available pipe, e.g. 3/4 din 2441, diameter 26.9 x 3.25 mm, length 1000 mm, Application Engines: 112, 113, 137 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=112-0040)

112-0961... BRAKE SPRING INSTALLER, Use to replace parking brake pressure spring. Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=112-0961)

112-0963... CHAIN LINK PRESS ADAPTER - DOUBLE ROW, Includes: chain guide and press thrust pieces. Use for pressing rivet onto outer link. this set comes with rivet pressing tool #000-5843....Application: M102, 104, 110, 111, 112, 113, 116, 117, 119, 120, 116, 275, 611, 612, 613, 642, 646, 647, 647, 668 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=112-0963)

113-0040... FAN HOLDER USE WITH T9A-36mm/TORQUE EQUIV. FAN CLUTCH HOLDING TOOL, Holds pulley when removing and installing fan clutch. Use with open end wrench #111-0201 and torque wrench #001-7221. (Replaces #119-0240 and #111-0040). Also see kit #B9042. Application Engines: M111, 112, 113, 119 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=113-0040)

116-0043... VALVE SEAL INSTALLER - 9mm, Use to press the valve stem seal onto the valve guide sleeve. Application Engine: M110, 115, 116, 117 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0043)

116-0101... CAMSHAFT HOLDING WRENCH...Aluminum wrench for holding and turning camshaft during assembly and timing...M110, 115, 116, 117, OM615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0101)

116-0134... THREADED ROD - 6 x 50mm, Use with chain rail pin puller #915-0734. Set of 5 pins. Application Engine: M110, 115, 116, 117, 119, 155, 272, 275, OM601, 602, 603, 604, 605, 606, 612, 615, 616, 617, 628, 640, 642 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0134)

116-0140... FLYWHEEL LOCK, Locks crankshaft on starter ring gear. Application Engines: M110, 115, 116, 117, 119, 615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0140)

116-0162... PARKING BRAKE SPRING HOOKUse to remove and install parking brake return spring. Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0162)

116-0462... BALL JOINT PRESS...Presses ball joint into steering knuckle with the knuckle in place on the car... Application: W116, 123, 126 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0462)

116-0621... STEERING ALIGNMENT PIN-LS75STEERING POSITION CHECK SCREW, Use to center steering gear for correct positioning of steering wheel during installation. Application: W107, 114, 115, 116, 123, 126 (LS90, L1Z) (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0621)

116-0663... VALVE KEEPER REMOVER, Special magnetic finger to remove conical valve keepers. Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=116-0663)

119-0114... FRONT CRANKSHAFT SEAL RING SLEEVE, For pressing in the front crankshaft radial seal ring, Application Engine: M112, 113, 119, 120 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=119-0114)

120-0201... FAN HOLDING WRENCH-65mm, Special open-end 65mm wrench for fastening fan hub. Also see kit #B9042. Application: M103, 104, 119, 120 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=120-0201)

120-0621... Engine Oil Level Dipstick (1988-1996) Engines: 103, 104, 111, 119, 120, 137, 604, 605, 606, 611, 612, 613, 628, 642, 647, 648 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=120-0621)

120-0721... Engine Oil Level Dipstick (1996-2005) Engines: 112, 113, 271, 272, 642, 646, 647, 648 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=120-0721)

126-0007... ANTENNA SPANNER WRENCH, Antenna mast mounting nut. Application: W107, 123, 126 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=126-0007)

126-0143... WISHBONE REMOVER & INSTALLER TOOL... Puller and installation tool for rubber mounts-lower wishbone. Also see #B129-0043. APPLICATION: W116, 123, 124, 126, 201 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=126-0143)

126-0714... IGNITION COLLAR REMOVAL, Rubberized interior allows easy turning of inner lock cover particularly on W126-and 124 chassis. Use with tool # 900-0059.W116, 123, 124, 126, 201 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=126-0714)

129-0109... LDA-BULB HOLDING TOOL, Use to remove and install socket bulbs in instrument cluster without having to remove complete instrument cluster. Application: W129, 140, 163, 170, 202, 208, 210, 220 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=129-0109)

1318... CIS PRESSURE GAUGE - BASIC KIT (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1318)

1318-M... FUEL INJECTION PRESSURE TEST - MASTER KIT. Checks charging (supply), running and leakage pressures of all types of injection systems. Includes: Gauge (160psi/1100kpa), 3-way switch, all hoses, all fittings and storage case. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1318-M)

1318-R... FUEL INJECTION PRESSURE GAUGE - ECONOMY KIT...Checks charging (supply), running and leakage pressures of all types of injection systems. Includes: Gauge (160psi/1100kpa), 3-way switch, hoses and fittings and storage case. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1318-R)

1318K... MASTER ADAPTER KIT,
1318/4 10X1mm TO 12X1.5mm fitting MALE /MALE
1318/5 8X1mm TO 12X1.5mm F/M
1318/5A 10X1mm TO 12X1.5mm F/M
1318/6 8X1mm TO 12X1.5mm fitting MALE /MALE
1318/6A 8X1mm TO 10X1mm fitting MALE /MALE
1318/6B 8X1mm TO 12X1.5mm fitting MALE /MALE 70mm LONG
1318/6C 6X1.0mm X 12X1.5mm fitting MALE /MALE
1318/7 12X1.5mm TO 12X1.5mm fitting MALE /MALE
1318/8 BANJO RING-8mm TO 10X1.5mm
1318/8A BANJO RING-10mm TO 12X1.5mm
1318/8B BANJO RING-12mm TO 14X1.5mm
1318/10-8 COPPER WASHER
1318/10-10 COPPER WASHER
1318/10-12 COPPER WASHER
1318/15-8 DOUBLE BANJO BOLT 8mm
1318/15-10 DOUBLE BANJO BOLT 10mm
1318/15-12 DOUBLE BANJO BOLT 12mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1318K)

1318R... CIS PRESSURE GAUGE KIT-ECON (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=1318R)

140-0001... NDA -OPEN END WRENCH 55 X 65mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-0001)

140-0007... NDA-PIN WRENCH FOR RUBBER MOUNT OF WINDSHIELD SCREEN WASHER (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-0007)

140-0233... MB# 140589023300 instrument Cluster Hook, set of two, Use to remove and install instrument cluster. Application: W124, 126, 129, 140, 168, 170, 201, 202, 208, 210, 463 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-0233)

140-1143... Remover/Intsaller - Lower Wishbone Bushing - W126 W140 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-1143)

140-1221... FUSE JUMPER - SMALL, Application 129/202/210 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-1221)

140-1463... MUSHROOM 38 PIN BREAK-OUT ADAPTER...Allows easy access to the 38-pin diagnostic socket when using scanners CS2000, iScan or with a standard DMM...Chassis W129, 140, 170, 202, 203, 208, 210, 220... Ground shipping only. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=140-1463)

163-0037... FUEL PIPE CONNECTION (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=163-0037)

168-0121... Trans. Dipstick Transmission: 716.5, 722.7, 722.8, A-Class (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=168-0121)

201-0543... REAR AXLE CARRIER THRUST ROD BUSHING PRESS- (201 ONLY) See B1837 for all model coverage (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=201-0543)

201-0821... Steering Position Check Screw, Use to center steering gear for correct positioning of wheel during installation. Application: W107, 114, 115, 123, (LS1, L1Z, LS68). (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=201-0821)

202-0007... FUEL SENDER PIN WRENCH (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=202-0007)

202-0014... IGNITION LOCK REMOVING SLEEVE...Use to aid removal and installation of the ignition lock cover...Application...W126, 129, 140, 163, 170, 202, 210, 414 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=202-0014)

203-0107... Fuel tank level sender wrench - W163, 203, 209, 211, 219. Also fits most BMW fuel senders. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=203-0107)

210-0007... IGNITION LOCK COVER REMOVER 129/140/210
210-0007 IGNITION LOCK COVER REMOVER W129, 140, 164, 169, 171, 199, 202, 203, 208, 209, 210, 211,215, 219, 220, 221, 230, 240, 245, 251, 414, 463, 639 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=210-0007)

210-0107... FUEL SENDER WRENCH (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=210-0107)

220-0061... Airmatic strut seal remover, used to remove top seal of front airmatic struts...W220 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=220-0061)

220-0343... STEERING KNUCKLE BALL JOINT PRESS: 211 (E-class from 2002); 215 (CL-Class from 2002); 219 (CLS-Class from 2006); 220 (S-Class from 2000); 230 (SL Class from 2003) (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=220-0343)

275-0021... M275 OIL LEVEL DIP SITCK (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=275-0021)

28-XYZ = BAUM tool# 28...HEAVY DUTY STUD REMOVAL KIT...Ideal for pulling threaded studs with a heavy duty impact wrench. Kit includes: bolt, sleeve and 14 collets Collet sizes include: 6x1.0, 7x1.0, 8x1.0 ,8x1.25, 9x1.0, 9x1.25, 10x1.25, 10x1.50, 12x1.25, 12x1.50, 14x1.50, 14x2.0, 16x1.5, 16x2.0mm. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=28-XYZ)

385-0007... GROVE NUT SOCKET, ML CLASS Lower Control Arm BALL JOINT...Use to remove and install the retaining nut on the supporting j-point of the bottom wishbone in the front and rear axle. Application chassis: W163 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=385-0007)

601-0008... LDA - INJECTION PUMP SPLINED WRENCH (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=601-0008)

601-0240... FLYWHEEL LOCK (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=601-0240)

601-0514... CENTERING SLEEVE, OM606 DIESEL INJECTION PUMP (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=601-0514)

601-0521... Diesel Injection Pump Lock Pin - LATE MODEL...Locks diesel pump cam to maintain timing during pump installation...OM601, 602, 603, 605, 606, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=601-0521)

602-0033... PRECOMBUSTION CHAMBER PULLER (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=602-0033)

602-0040... FLYWHEEL LOCK - 102/103/104/111/120/601/602/603/604/605/606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=602-0040)

603-0040... WATER PUMP PULLEY HOLDER (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=603-0040)

606-0009... INJECTION NOZZLE SOCKET - 22mm...for removal and installation of diesel injection nozzle...OM604, 605, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=606-0009)

611589009900... Glow Plug Hole Repair Kit, for large loop style, superseded to MB# 900589019900 for pencil and large loop style glow plug hole repair (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=611589009900)

615-0001... VALVE ADJUSTING WRENCH SET - 14mm..."PAIR"...Diesel valve adjusting wrenches...Use with retaining nut holder #615-0004 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=615-0001)

615-0003... DIESEL SPRING PLATE HOLDING WRENCH - 30mm...Use to hold retaining nut when adjusting valves with 14mm wrench pair #615-0001...Application...OM615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=615-0003)

615-0007... PRE-CHAMBER RETAINER RING PIN WRENCH - DIESEL...used to remove and install the threaded retainer ring of the pre-chamber...Application...OM615, 616, 617.91, 617.95 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=615-0007)

QP1000 Torsion Bar Saver W123, W126 S-Class (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=QP1000)

617-0010... SOCKET 1/2Dr Long XZN Skt, superseded to ST3054X-M12 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=617-0010)

617-0053... REAMER, superseded to 917-0053 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=617-0053)

617-0109... SPLINED/SERRATED SOCKET...to remove and install the injection pump stub pipe and pressure valve on...application...OM601, 602, 603, 605, 606, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=617-0109)

617-0721... DIESEL ADJUSTING FIXTURE. No Longer Available (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=617-0721)

617-0821... TRANSMITTER...Diesel Timing Static Position Indicator, to measure start of fuel delivery using the RIV method. Application: OM601, 602.91 602.93 602.94 602.96, 603.91 603.93 603.96 603.97, 605, 606, 617.93 617.95 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=617-0821)

66US-16... SPARKPLUG SOCKET-MAG-16mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=66US-16)

691A... CARB.SYNCHRONIZING DEVICE (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=691A)

71B... COMPRESSION TESTER FOR GASOLINE - 300PSI Includes 14mm/18mm adapter. (10mm/ 12mm optional) (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=71B)

900-0059K... DASH SERVICE KIT, INCLUDES: DASH HOOK SET, RADIO KEYS, IGNITION REMOVAL PINS (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=900-0059K)

900589019900... Glow Plug Hole Repair Kit, for pencil and large loop style glow plug hole repair (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=900589019900)

900-8673... DIESEL INJECTION PUMP LOCK PIN - EARLY MODEL...Locks diesel pump cam to maintain timing during pump installation...OM615, 616, 617, 621 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=900-8673)

901-0053... REAMER-GLOW PLUG PORT-12mm for 601; 602; 603; 617.95 turbo (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=901-0053)

902-0033B... PRE CHAMBER HAMMER ADAPT TIP / 604; 605; 606; 615; 616; 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=902-0033B)

909-0021... LAMBDA TESTER 100/100IR (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=909-0021)

915-0107... GROOVENUT SOCKET-TAIL FLANGE (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=915-0107)

915-0207... GROOVENUT SOCKET...REAR AXLE BEARING GROOVENUT...SOCKET - 107/114/115/116/123/126 CHASSIS (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=915-0207)

915-0734... CHAIN RAIL PIN PULLER - HEAVY DUTY...Pulls sliding rail pins on all models...Includes: Puller, 5mm, 6mm, and 8mm spindles...Application...ALL (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=915-0734)

916-0021... DIESEL VACUUM ADJUSTING ROLLER SET OF 3 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=916-0021)

917-0053... GLOW PLUG REAMER...Loop style glow plugs use this LARGE PORT-18x1.25mm threaded reamer for removing heavy carbon deposit from glow plug hole which is a major cause of glow plug failure. For models from 1967 to 1985. Non Turbo. OM615, 616, 617.91/93 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=917-0053)

917-0623... HYDRAULIC LIFTER GAUGE-V8 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=917-0623)

924-0231... COIL SPRING COMPRESSOR... 116, 126, 124, 126, 129, 140, 170, 201, 202 Compresses front and rear axle springs in the car on models with idler arm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=924-0231)

929-0105... RADIO REMOVAL TOOLS (2) 1990> No Longer Available, use 963-0105 or 900-0059K (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=929-0105)

936-0223... DIESEL DRIP TUBE...Use to adjust start of fuel delivery injection pump timing...OM615, 616, 617 to 1985 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=936-0223)

940-0046... HYD ENG MOUNT GUAGE - 124/201 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=940-0046)

966-0043... DIFFERENTIAL MOUNT BUSHING R&I-W124/140/201 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=966-0043)

966-5843... TIMING CHAIN SPLITTER - SINGLE & DOUBLE ROW...Use to separate single and double row timing chains without damaging links...All engines (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=966-5843)

A0202... 120 PIN BREAK OUT BOX - WITH 2 EXTENSION CABLES (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=A0202)

A020202... 35 PIN BREAK OUT BOX CABLE. NO LONGER AVAILABLE (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=A020202)

B110-0101... Spark Plug Boot Puller (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B110-0101)

B110-0101... VALVE ADJ.WRENCH-17mm-M110, REMOVING SPARK PLUG CONNECTORS - ML (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B110-0101)

B112-0001K... Cam Alignment Tool Kit - Includes 112-0001, -0132, -0032 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B112-0001K)

B113-0001, FAN CLUTCH WRENCH 36mm OPEN (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B113-0001)

B129-0343... Lower wishbone support joint R&R tool, Use to remove and install lower ball joint support on the wishbone, models W124, 129, 201, replaces 3107-0143. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B129-0343)

B140-1143... Lower Control Arm Bushing Kit (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B140-1143)

B1407... Oil Filter Cover Sockets...set of three...27mm, 32mm and 36mm...for oil filter housings on Mercedes and Smart cars...OM364, 366, 604, 605, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B1407)

B1837... REAR WHEEL CARRIER SUPPORT BUSHING KIT W124, 129, 140, 201, 202 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B1837)

B2014... TRIM REMOVAL TOOL KIT/PANEL POPPER KIT...Set of 4 panel poppers for removing panels and trim on all types of vehicles (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B2014)

B202-0143... CONTROL ARM BUSHING TOOL KIT
REPLACES MB# 202 589 01 43 00 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B202-0143)

B210-0043... FRONT AND REAR LOWER CONTROL ARM BUSHING TOOL W210 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B210-0043)

B210-0243... REAR DIFFERENTIAL BUSHING TOOL W210 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B210-0243)

B277-477... WEDGE SET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B277-477)

B606-0053... REAMER-GLOW PLUG PORT- LONG VERSION - OM604, 605, 606, 648 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B606-0053)

B6700... ADJUSTABLE FILTER WRENCH (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B6700)

B7200... SHIFT SHAFT BUSHING INSTALLER (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B7200)

B7205J... The Terminator...Frequency Probe...The Terminator is a superior Logic probe combining the features of a DMM and oscilliscope but simplifying the display for technicians that want to find the pulse but don't need the to see the trace.B7205J· SensorsPower and Ground of sensorsMAPMAFO2 SensorsRPM SensorsCrank Angle SensorVehicle Speed SensorsTDC SensorIdle SwitchABS Wheel Speed SensorsThrottle Position SensorCam Position SensorsAir Temperature SensorCoolant Temperature SensorTachometer· Electric Relays· Motors· Actuators· Starting & Charging Systems· CAN Bus DiagnosticsReads:· Voltage · Frequency · Duty CycleIdeal for CAN Bus diagnosticsIncludes:· Terminator Probe· Ground cable· Extension Cord· extra Probe tips· Storage Box (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B7205J)

B900-0059K... MB Ignition/Dashboard TOOL Kit, Kit includes early and late model ignition switch cover grippers, retainer nut socket (6/97 and newer), ignition lock release pins, dash removal hooks and radio release keys.W126, 129, 140, 163, 170, 202, 210, 211, 220, 230, 240, 414, 463 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B900-0059K)

B9042... Mercedes Benz & BMW Radiator Fan Service Wrench Kit...eleven piece set Contains: 32mm - BMW Viscous Fan Nut...BMW Pulley Holder #113150...36mm - Mercedes Viscous Fan Nut...65mm - Mercedes Fan Clutch Nut...Mercedes Fan pulley holder #113-0040...Mercedes Water Pump holder #103-0040...Fan Belt Service/Idler Pulley Wrench 8mm and 10mm #900-0037 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=B9042)

BDIPKIT-MB... Dipstick kit, (Engine/Transmission) contains 120-0721, 120-0621, 168-0121, 140-1521 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=BDIPKIT-MB)

GS300... OBDII diagnostic scan tool, Works with all 1996 and newer vehicles that are OBD2 compliant (including CAN) (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=GS300)

GS500... OBD-II Scanner Erases trouble codes and Resets Check Engine Lights. Supports all current protocols SAE1850 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=GS500)

H4550... LINE WRENCH...INJECTION WRENCH - 17mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=H4550)

H4550-14... FLARE NUT CROWFOOT-14mm 1/4 Drive... Line wrench head... for injection pipe cap nuts on OM601, 603, 604, 605, 606, 611, 612, 613, 628, 640, 646, 647, 648, 661, 662, 668 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=H4550-14)

H4561... DIESEL PUMP MOUNT BOX WRENCH - 13mm...Special 'L' wrench to access injection pump mount bolts...OM601, 615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=H4561)

KK126-00... Brake Piston Press (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK126-00)

KK126-01... BRAKE PAD HOOK (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK126-01)

KK126-02... BRAKE PISTON CLAMP (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK126-02)

KK126-03... PISTON ROTATING PLIERS (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK126-03)

KK126-20... DISK BRAKE PISTON TOOL SET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK126-20)

KK128-2... TIE ROD BALL JOINT PULLER - 23 - 32mm, Puller for seperating tie rod and steering knuckle ball joints without tearing boots...Application...ALL (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK128-2)

KK129-0... UNIVERSAL BALL JOINT PULLER...Scissor type...allows access of difficult to reach and obstructed ball joints, two stage action permits removal of spindles up to 50mm in length. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KK129-0)

KO4133... 32 SPLINED REGULATOR VALVE SOCKET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=KO4133)

M0030... WHEEL STUD ALIGNMENT GUIDES, Use in place of 2 lug bolts to hold wheel in place while installing other lug bolts 12X1.5mm, Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M0030)

M0030A... WHEEL STUD ALIGNMENT GUIDES, Use in place of 2 lug bolts to hold wheel in place while installing other lug bolts M14X1.5, Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M0030A)

M0035A... 46 MM SPECIAL SOCKET...Fuel Tank...to remove fuel tank filter body and fuel gauge sending units...application...ALL (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M0035A)

M24D... DIESEL INJECTION NOZZLE TESTER...Test opening pressure, spray pattern, and cleans injectors. Kit includes: Gauge (7000psi/500bar) pump and steel adaptor line. May be upgraded to test gasoline injectors...Allow three weeks GROUND shipping from Germany. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M24D)

M500... GLOW PLUG ANALYZER...Use to test 12 volt glow plug systems in late model diesel engines...All 12 volt glow plug diesel models (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M500)

M501... Throttle Potentiometer Tester...Used with late model engines...M111, 112, 113. No Longer Available. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M501)

M502-XXXX = BAUM# M502...DIESEL FUEL PRESSURE TESTER...Measures the diesel fuel pressure in high pressure CDI type engines...Diesel from 1997 forward (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M502-XXXX)

M70TE... DIESEL COMPRESSION TEST GAUGE...Gauge assembly only = no adapters (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE)

M70TE/1... ADAPTER DIESEL COMPRESSION GAUGE - EARLY MODEL NOZZLE...Adapter for early large injection nozzle port. 24mm X 2.0mm...Application...OM615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE/1)

M70TE/1A... DIESEL COMPRESSION GAUGE ADAPTER - LATE MODEL NOZZLE...Adapter for later model diesels with small injection nozzle port. 22mm X 1.5mm...Appplication...OM601, 602, 603, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE/1A)

M70TE/2... BOSCH GLOW PLUG 18X1.5mm - EARLY MERCEDES...Adapter for early large Glow plug port. 18mm X 1.5mm...Application...OM615, 616, 617 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE/2)

M70TE/2A... Diesel compression test adapter...BOSCH GLOW PLUG 12X1.5mm - LATE MODELS...Adapter for later model diesels with small Glow plug port. 12mm X 1.5mm...Application...OM601, 602, 603, 604, 605, 606, 612, 617 Turbo (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE/2A)

M70TE/X... DIESEL COMPRESSION ADAPTER EXTENSION...Used to access deep port injectors or glow plugs on late model engines. Use with adapter# M70TE/2A...Application...OM604, 605, 606, 612 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TE/X)

M70TEK... Diesel Compression Gauge Kit...Mercedes Benz, VW, Audi 22x2mm/MB late 22x1.5/Nissan/BMW 24x1.5/VW TDI 10x1 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=M70TEK)

QP1000 Torsion Bar Saver W123, W126 S-Class, this will fix ONE side = two required if both ends are broken, more data here http://www.mercedesshop.com/shopforum/showthread.php?t=178104 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=QP1000)

SPO-617... Special Order VALVE Adjust Tool Kit. QTY 1 EACH. 615-0001 = VALVE ADJUSTING WRENCH SET - 14mm PAIR... 615-0003 = DIESEL SPRING PLATE HOLDING WRENCH - 30mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=SPO-617)

ST1009DC...PULLEY MOUNT BOLT WRENCH...Special 10mm allen wrench 500mm long....Use to loosen and tighten the mount bolts of the idler pulley when adjusting v-belt of refrigerant compressor...Application...M116, 117, 119 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST1009DC)

ST1023... DIESEL PUMP MOUNT WRENCH-13mm (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST1023)

ST12373... Steel Wire/Caliper Brush (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST12373)

ST12373/1... Brass Wire Brush (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST12373/1)

ST1520...KABLEX CONNECTOR KIT - MERCEDES...Includes: Round contact pin extractor 1.5mm & 2.5mm, Flat plug contact removers for 2.8mm, 2-prong contacts 5.8mm, 1.6mm Micro-Timer II and !II, 9.5mm Maxi-Power Timer, 5.5, 8,5mm and twin secondary lock device and E-95 extractor. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST1520)

ST3000... 1/2 Drive MB Multi Spline Socket (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3000)

ST3047-12...GLOW PLUG REMOVAL SOCKET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3047-12)

ST3049-8...SHORT HEX HEAD SOCKET - 8mm X 24mm LONG 3/8" drive...Removes screws on viscous fan couplings and pulley facings. (#103-0109)...application...M103, 104, 119, 120, 602, 603, 605, 606 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3049-8)

ST3054X-M10... 1/2 Drive Long XZN 10mm HEAD BOLT SOCKET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3054X-M10)

ST3054X-M12...1/2 Drive Long XZN 12mm Socket (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3054X-M12)

3054X-M8...1/2 Drive Long XZN 8mm Socket (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3054X-M8)

ST3545-14...14MM CROWFOOT 1/2" DRIVE (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3545-14)

3545/17 1/2 Dr Crow Foot (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3545/17)

ST3676 OIL DRAIN WRENCH - No longer available (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3676)

ST3677-14... X17 Oil Drain Plug Wrench (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST3677-14)

ST4335-12... 12 POINT SOCKET WRENCH 17MM...DISCONTINUED PRODUCT NO LONGER AVAILABLE. (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST4335-12)

ST4335-21 Tubular Socket Wrench (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST4335-21)

ST4335-9... BRAKE BLEEDING WRENCH - 9mm...Hollow tubular wrench allows brake line to pass through when bleeding brakes (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST4335-9)

ST440-14... FLARE NUT CROWFOOT-14mm 1/4 Drive... Line wrench... for injection pipe cap nuts on OM601, 603, 604, 605, 606, 611, 612, 613, 628, 640, 646, 647, 648, 661, 662, 668 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST440-14)

ST440-22... 22 MM CROWS FOOT (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST440-22)

ST440-24... 24 MM CROWS FOOT (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST440-24)

ST51-27... 1/2" DRIVE SOCKET, 27MM DEEP, DIESEL NOZZLE SOCKET - 27mmSpecial 12 point 1/2" DR. socket with interior relief to accommodate the small leakage return tubes on top of injection nozzle. Also available in Hazet brand.OM601, 602, 603,612, 615, 616, 617, 646, 647, 648 (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST51-27)

ST51-30... 1/2 Drive Deep 30 MM 12 POINT SOCKET (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST51-30)

W1088... CLUTCH PILOT BEARING PULLER (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=W1088)

T13-22... GAS TANK DRAIN PLUG REMOVAL TOOL (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=T13-22)

ST7600... superseded to ST# 50160035... Universal Torque Limiter, 15-35 Nm Adjustable torque limiter for use with 16mm spark plug socket. Application: All (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST7600)

ST54-19... 19MM ALLEN, 1/2 inch drive (http://catalog.mercedesshop.com:80/item.wws?qty=1&mfr=MBSC&sku=ST54-19)

for customer